Profoto D4 Guía de usuario descargar pdf (Pagina 7)

ProRing

www.profoto.com

Connecting Ring Flash

When connecting the lamp head plug to the lamp head socket, align the dots on the plug with the

white dot on the generator panel. Push the plug all the way in. Secure by turning the locking ring

on the plug clockwise.

Changing Fuse

The fuse is placed at the back of the head. Unscrew the fuse holder counterclockwise. Pull the fuse

out. Use fuses that are recommended, (for more details please read “Technical Data”. Push the new

fuse all the way in. To lock the fuse holder when changed fuse, screw the fuse holder clockwise.

Changing Flash Tube

When removing a flash tube, remove the two locking rings, pull out the protective grating, pull

the flash tube straight out of the sockets. When inserting a new flash tube, check that the trigger

clasp fit properly around the flash tube trigger connection. Push the protective grating in to place.

Secure with the two locking rings.

1: Press down the safety

pin to release

2: Pull the safety

pin out

CHANGING GLASS COVER

Unlock glass cover

Do not touch hot parts with bare ﬁngers! Modeling lamps, ﬂash

tubes and certain metal parts emit strong heat when used!

When changing modeling lamp, flash tube, fuse or glass cover

the lamp cable must be disconnected from the generator.

3: Press down the safety

pin and fit under the screw

to lock

CHANGING GLASS COVER

Lock glass cover

2: Push the safety pin in

1: Fit the safety pins in

existing holes located

on the glass cover

3.15 AT

Fuse

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Profoto D4 Guía de usuario Pagina 7